Set of 2 Black Berkey Purification Elements and a Set of 2 PF-2 Fluoride Filters
Black Berkey Purification Elements are more powerful than any other gravity filter element currently available. In fact, we tested the Black Berkey purification elements with more than 10,000 times the concentration of pathogens per liter than is required by standard test protocol. This concentration of pathogens is so great that the post filtered water should be expected to contain 100,000 or more pathogens per liter (99.99% reduction - the requirement for pathogenic removal). Incredibly the purification elements removed 100%. Absolutely no pathogens were cultured from the effluent or were able to be detected, even under an electron microscope, setting a new standard in water purification.
Black Berkey purification elements are so powerful, they can remove food coloring from water without removing the beneficial minerals your body needs. Virtually no other filtration element can duplicate this performance.
No need for expensive disposable filters. Black Berkey purification elements are re-cleanable. When the flow rate decreases simply brush the Black Berkey purification elements with a ScotchBrite pad under running water, reinstall and your system is again ready to purify water. Each durable and efficient purification element will last for up to 3,000 gallons (6,000 gallons per set of two) and provide years of efficient water purification. What's more, the unique Black Berkey purification elements are self-sterilizing.
The powerful Black Berkey purification elements also remove or reduce pathogenic cysts, parasites, harmful or unwanted chemicals such as herbicides and pesticides, VOCs, detergents, organic solvents, trihalomethanes, cloudiness, silt, sediment, nitrates, nitrites, heavy metals, foul tastes and odors, yet they leave in the healthful and beneficial minerals that your body needs.
PF-2 Fluoride and Arsenic Reduction Filters
The PF-2 reduction elements screw onto the bottom of the Black Berkey water purification elements and work in conjunction to adsorb the following unwanted elements found in drinking water.
• Arsenic V and pre-oxidized Arsenic III
• Other residual heavy metal ions
FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm (11 lpm) per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction).
ARSENIC: This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations.
REPLACEMENT: Under normal circumstances, a set of 2 fluoride filters should be replaced every 1000 gallons
FREE Shipping in the Continental US Only.